Approx. Rs 950 / Piece
Approx. Rs 4,000 / Piece
Spiroheat Single Ended Elements have all terminal connections at one end. These Single Ended Elements are made of Reaction Bonded Silicon Carbide.
Typical density of Spiroheat Elements are 3.3 Gms./cc – 3.4 Gms./cc. These are ideal where Furnace access is limited to any one plane.
Approx. Rs 3,500 / Piece
One of the earliest Heating Element designs, the enlarged cold ends of the Dumbbell style element were originally made with over sized cold ends to increase cold end cross section, lowering electrical resistance, thereby lowering cold end operating temperatures.
Modern Dumbbell Alpha Rod by contrast, employ an advance technology to keep the terminal ends cool by virtue of the decreased resistivity of the lower resistance cold end material used in the manufacturing process.
Over size cold ends are therefore no longer necessary, the old style resistance ratio was 1:3, whereas the new DB resistance ratio is 1:40. Maximum temperature is 1550 deg. C. (For Dimensions, Resistance, etc. kindly contact us):
Approx. Rs 15,000 / Piece
MOSIL 1800 is a high density material consisting of molybdenum disilicide (MoSi,) and self forming glaze of silicon dioxide (SiO2). It can be used upto Furnace Temperature of 1800°c. These Elements do not age and have a long service life.
The Temperature of around 1200°c the Element becomes ductile. It is brittle at Temperature below 1200°c.
The elements are U shaped and are mostly used suspended with the bottom of the "U" down. The element consists of two cold ends(Lu) and a U-shaped hot section(Le). The cold ends are twice the diameter of the hot section and are attached by a weld. The extremities of cold ends are metallized with aluminium to provide a low-resistance contact area to which the end zones are made with flat braided aluminium straps.
We will contact you soon !
Patel Heaters & Control Pvt. Ltd.
Makarpura Gidc, Vadodara,